Browse Listings

Kitchen and Bath
Category

Buy.Sell.Save.Recycle on cabinets, countertops, backsplashes, islands, sinks, tile, vanities, toilets, and more in our Kitchen and Bath Section! Our sellers supply it so you can buy it!

Premium Listings

  • 198

    Koala Kare® Baby Changing Station


    Koala Kare® KB300-01SS HORIZONTAL-FOLDING, SURFACE-MOUNTED Grey BABY CHANGING STATION with STAINLESS STEEL Veneer Front Panel KOALA KARE® surface-mounted, horizontal-folding, polypropylene baby changing station with stainless steel front panel (NEW model for 2022 / replaces the discontinued KB200-SS). While the KB300-SS is available in 2 Different Colors [Grey (01) and White Granite (05)] - this listing is for the KB300-01SS Grey. Type 304 stainless steel veneer front panel with laser etched Koala logo integrates with other satin-finish accessories in the restroom. Exclusive to KOALA KARE® products, the bed surface contains Microban® antimicrobial additive permanently embedded into the plastic, reducing damaging & odor causing microbial growth. Built to meet or exceed the stringent standards set by public and private regulatory agencies. Meets ASTM safety standards, plus ANSI & ADA requirements when properly installed. Steel-on-steel hinge mechanism with 11GA steel mounting supports meets ASTM and EN safety standards when properly installed. Built-in, locking, dual-cavity liner dispenser with integrated spring tab for "one-at-a-time" dispensing. Either cavity can dispense sanitary liners (KB150-99) and/or diaper disposal sacks (KB160). External (wall-mounted) stainless steel hook for bags or purse included (KB310-54). Includes an impervious TPU child safety strap (replaceable). Contoured changing surface area is a large 535 sq. in (3452 sq. cm). Easy to install using basic tools. Concealed gas spring / pneumatic cylinder mechanism ensures smooth, controlled opening and closing with a minimal amount of force. Made in the U.S.A. If you're looking for a premium-quality horizontal baby changing table with a high-end look of stainless steel that won't break the bank, look no further. The Koala KB300 Series is the NEW flagship model for KOALA KARE®. Its convenient shape and efficient design enables you to provide restroom patrons with all the benefits of modern, sanitary changing facilities. And with the front brushed stainless steel veneer panel of the KB300-01SS, a great product is made even better. The stainless veneer seamlessly integrates this changing station with other satin-finish accessories in the restroom. Dimensions: Width x Height: 35-15/16” x 20-3/4” (897 mm x 527.5 mm) Depth from Wall Surface (closed): 4” (101.6 mm) Depth from Wall Surface (open): 21-3/16” (539 mm) Materials & Finish: Exterior: Grey Polypropylene with Type 304 Brushed Stainless Steel Veneer Interior: Grey Polypropylene with Microban® (exclusive to Koala®) Interior Chassis (Frame & Hinge Mechanism): 11GA Steel External Bag Hook (KB310-54): Solid Stainless Steel Rod (7/8" diameter) with Brushed (No. 304) Finish This newly designed, durable, attractive horizontal-folding baby changing station (Koala Kare® KB300-01SS) is made of injection-molded, high-density polypropylene (GREY in color) with MICROBAN® antimicrobial additive permanently embedded into the plastic. It is easy to clean and resistant to odors and both fungal & bacteria growth. But unique to the Koala KB300-SS is the brushed (Type 304) Stainless Steel Veneer with a laser engraved Koala logo on the front of the changing station (visible when folded closed). With this touch of stainless, it's easier than ever to coordinate with other stainless steel restroom fixtures. Graphics and safety messages are provided in four (4) different languages. In addition, a newly-designed, built-in, locking, two-cavity dispenser for sanitary liners (KB150-99) and/or diaper disposal sacks (KB160) is conveniently located just above the changing surface when folded open. With the new integrated spring tab, only one liner is dispensed at a time. Total capacity of the dispenser is approximately 50 liners if both cavities are used for liners. Neither liners nor diaper bags are included. The KB300-01SS is designed to be installed directly on to an existing wall surface using the included hardware. Six pre-drilled mounting holes in the back wall of the unit are designed for wood screws (provided) into wood studs on 16" centers. For installation on walls that do not have wood studs 16" on center or metal studs or concrete block, specialized fasteners or toggle fasteners may need to be obtained by the owner locally. Installation instructions (provided) address these different wall materials / scenarios. The station folds down horizontally so that the infant is laying parallel to the wall. With a reinforced steel-on-steel hinge running the full length of the station and with 11-gauge steel mounting chassis, the KB300-01SS meets all ASTM requirements for static load performance when properly installed. Although designed for infants that weigh no more than 50 lbs., in testing the KB300-01SS easily supported 200 lbs. with minimal deflection of the "bed" from horizontal. A pneumatic cylinder provides for easy, slow, and controlled opening and closing of the bed. Both the pneumatic cylinder and metal hinge mechanism are fully concealed (regardless of bed position) to eliminate tampering and possible pinch hazard. The contoured changing surface area is 535 sq. in. (3452 sq. cm) and comes complete with a impervious, replaceable thermoplastic polyurethane (TPU) safety strap. Made from solid stainless steel rod (7/8" in dia.), an external bag hook (KB310-54) is provided to mount on the wall next to the changing station, allowing for safe storage of and easy access to purse or diaper bag. When open the changer extends out from the wall face 21-3/16” (539 mm). And when properly installed, this changer complies with the highest Americans with Disabilities Act (ADA), American National Standards Institute (ANSI), and Texas Accessibility Standards (TAS) regulations.

    $600.00 / ea
  • 350

    Kohler: Ironridge® 34" undermount single-bowl farmhouse kitchen sink


    The Ironridge farmhouse kitchen sink features a sleek apron that brings a modern, clean-line aesthetic that will complement any kitchen space from farmhouse-traditional to contemporary. A large, single bowl accommodates large pots and pans, while the sloped bottom helps with draining and cleanup. Crafted from enameled cast iron, this sink resists chipping, cracking, or burning for years of beauty and reliable performance. A standard apron front makes it easy to install on 36" apron-front cabinetry. The Self-Trimming® design requires only a simple rough cut, overlapping the cabinet face for beautiful results. Link: https://www.kohler.com/en/products/kitchen-sinks/shop-kitchen-sinks/ironridge-undermount-single-bowl-farmhouse-kitchen-sink-24268?skuId=24268-0

    $1,000.00 / ea
  • 180

    Moen S6700BN faucet


    Moen S6700BN bathroom sink faucet

    $300.00 / ea
  • 150

    Shower Trim- Handle and Valve Valve


    Black Matte Shower Handle Trim and Valve Brand New Boxed

    $45.00 / ea
  • 139

    30" White Vanity


    This freestanding vanity adds a provincial look to your bathroom or powder room with its simple, breezy silhouette. Handmade from solid wood, this single vanity features a resin countertop with an integrated rectangular sink. Two soft-close cabinet doors beneath the sink open to reveal an area for storing extra linens and cleaning supplies. Plus, its lower shelved space provides storage for toiletries, washcloths, and other bathroom must-haves. It's compatible with a 4'' center-set faucet (sold separately).

    $490.00 / ea

Contractors Overstock is revolutionizing the way that unused, leftover and unwanted building materials, tools, supplies and equipment in the construction industry are bought and sold around the United States. Contractors Overstock is redefining the meaning of Building Material Classifieds, while at the same time setting new standards for our users.

Help Center
Follow Us